
+400-8110278
International Headquarters:
No. 801 Huagang Road, Wujiang Economic and Technological Development Zone, Suzhou City, Jiangsu Province, China
Global Customer Service Center:
Room 1101, Building 7, Phase 2, Nan'an Xindi, Suzhou Industrial Park, Jiangsu Province, China
No.20306 & 20307, 1st Street, 2nd Floor, East No.3 Gate, Zone 2, Yiwu International Trade City, Zhejiang Province, China
3rd Floor, Plaza No. 157, Main Boulevard, Sector C, DHA Phase 6, Lahore, Pakistan
No. 65A Rustaveli Street, Yakasaray District, Tashkent, Uzbekistan
Air conditioners and water pumps typically consume 2% to 4% of the system throughput. Liquid cooling maintains tighter control over cell temperature, which usually extends cycle life and delivers better performance in high-temperature regions, at the cost of higher initial investment and more maintenance points. Liquid cooling often pays for itself in hot areas, while air cooling is usually more cost-effective in mild climates.
Available kWh (specify depth of discharge, temperature, and end-of-warranty state) to avoid the most common comparison errors.
Warranty cycle count and end-of-life capacity guarantee: 6,000 cycles to 70% capacity ≠ 6,000 cycles to 80% capacity.

Round-trip efficiency: Measured on the AC side at the grid connection point. A 2-percentage-point difference translates to substantial real financial gains after thousands of cycles.
Scope of supply: PCS, transformers, switchgear, civil works, and installation — this is a common source of seemingly "cheap" quotes.
Party responsible for freight, customs duties, and warranty labor: A decisive clause for overseas projects.
EMS capabilities: Forecasting, multi-objective dispatch, and data export determine how much additional revenue you can generate.
Fire and safety certifications recognized by local authorities: Non-compliance may directly halt the project at the grid connection acceptance stage.
Expansion path: Whether a second unit can be paralleled later, leaving a fallback for selection mistakes.
Forecast PV output and load, rather than only performing passive response.
Execute multi-objective dispatch (self-consumption + demand capping + peak-valley arbitrage) with user-configurable priority levels.
Stay within warranty boundaries (depth of discharge, C-rate, temperature) instead of exceeding them for short-term performance indicators.
The payback period depends almost entirely on three local variables: peak-valley electricity price spread, basic electricity (demand) billing method, and the number of full cycles the site can run in a year. These three factors vary drastically across regions and electricity pricing mechanisms. Model using your own 12-month interval load data, do not rely on public average values. Meanwhile, require every supplier to provide the dispatch simulation behind their payback period calculation.
