
+400-8110278
International Headquarters:
No. 801 Huagang Road, Wujiang Economic and Technological Development Zone, Suzhou City, Jiangsu Province, China
Global Customer Service Center:
Room 1101, Building 7, Phase 2, Nan'an Xindi, Suzhou Industrial Park, Jiangsu Province, China
No.20306 & 20307, 1st Street, 2nd Floor, East No.3 Gate, Zone 2, Yiwu International Trade City, Zhejiang Province, China
3rd Floor, Plaza No. 157, Main Boulevard, Sector C, DHA Phase 6, Lahore, Pakistan
No. 65A Rustaveli Street, Yakasaray District, Tashkent, Uzbekistan
The off-grid solar-storage system, which is clearly equipped with solar panels and batteries, fails to power high-power appliances such as air conditioners, electric kettles, and electric ovens. Once these appliances are used, the inverter will trigger overload protection, resulting in alarms or even power outages. How should this problem be solved?
The load-carrying capacity of an off-grid system fundamentally depends on the continuous output power of the inverter, and it is also jointly affected by the discharge capacity of the battery and the power supply capacity of the photovoltaic system. As the "core of energy conversion" in the system, the inverter is responsible for converting the direct current from the battery into the alternating current required by household appliances. For inductive loads of the motor type (such as air conditioners and water pumps), the inrush power at the moment of startup usually reaches 3 to 5 times the rated power. If the operating power of the appliance exceeds the continuous rated power of the inverter, or the startup inrush power exceeds the peak load-bearing capacity of the inverter, the system will trigger the protection mechanism due to "overload".
Solution 1: Adjust power consumption habits and adopt low-power alternatives
This is the lowest-cost and fastest-to-implement countermeasure. It maximizes the efficiency of the existing system by reducing the power load pressure on the system from the demand side.

For high-energy-consumption needs such as hot water supply and cooking, it is recommended to use gas water heaters, gas stoves and other equipment that take liquefied petroleum gas or natural gas as alternative energy sources. These energy sources have high energy density and can efficiently meet the instantaneous high-power energy consumption demands. Prioritize low-power electrical appliances with first-class energy efficiency. For example, use an electric pressure cooker instead of an ordinary rice cooker, which has a shorter cooking cycle and can reduce overall power consumption by 20%-30%; use a small-capacity air fryer or mini oven instead of a traditional high-power oven to reduce the power requirement of a single device. Avoid turning on multiple high-power appliances at the same time, and use them in staggered time periods to reduce the instantaneous total load of the system and prevent the overload protection from being triggered.
Solution 2: Replace or parallelly expand the inverter
If the core energy consumption needs still cannot be met after optimizing power consumption habits, upgrading the "energy conversion core" of the system — the inverter — is the most straightforward solution.
Replace with a high-power inverter: Select an inverter with a 20%-30% margin in rated power based on the total maximum simultaneous power of commonly used high-power appliances. Some brands' dedicated off-grid inverters support the parallel connection of multiple units of the same model. For example, most models of Techfine inverters can multiply the output power of the system, making them a preferred solution for meeting ultra-high-power energy consumption demands. It should be noted that the inverters connected in parallel must be of the same brand, the same model and support the parallel function. Different devices cannot be randomly mixed for parallel connection.
Solution 3: Install a soft starter
To solve the problem of excessive startup inrush current of inductive loads such as air conditioners and water pumps, installing a soft starter is a cost-effective targeted technical solution.
Install a soft starter in the motor drive circuit of equipment such as air conditioners and water pumps. It can smoothly control the output voltage to make the motor gradually accelerate to the rated speed, thereby reducing the startup current from the original 3-5 times of the rated current to about 1.5-2 times of the operating current, greatly reducing the instantaneous power impact during the startup phase. The soft starter is only effective for inductive loads and has no obvious effect on resistive loads such as electric kettles and electric ovens.
Solution 4: Improve the power generation and energy storage support capacity
Sometimes, the system cannot drive high-power appliances not simply due to a power bottleneck, but due to insufficient energy supply and storage capacity: insufficient battery power, poor discharge capacity, or too little power generation from solar panels to support the short-term energy consumption of high-power loads will also lead to system failure.
Increase the capacity of the battery to ensure sufficient energy reserve to support the short-term operation of high-power appliances. According to the charging capacity of the system, appropriately increase the capacity of solar panels to increase the daily power generation, ensure that the battery can be fully charged, and provide a sufficient energy source for high-power energy consumption.
